Edge Flexible Back Band Saw Blades
Gauge Hard Edge Flexible Back band saw blades are premium
bands for woodworking on all Vertical/Stationary 2-Wheel
Band Saws. They also do a great job on plastic, mild steel
and non-ferrous metals (for machines with speed
reduction). Tooth hardness 62-63Rc. Back hardness 28-32Rc
for maximum flexibility. All sizes have raker set teeth
for cutting wood or metal with good chip clearance and a
smooth finish. These are heavy duty, durable, commercial
grade band saw blades for industrial, woodworking, DIY and
professional craftsmen. Blades available in Stock Lengths,
Custom Lengths and 100' coils.
Band (Hobby and Bench Top) Saw Blades
These economically priced blades offer the best value to the
hobbyist and occasional woodworker. Narrow wood cutting
blades in thin gauge (.014, .015, .018) are ideal for 2 and
3 wheel bench top saws. .020 gauge is standard for 2 wheel
stationary saws with up to 14" dia. wheels. Hook style teeth
with a 10 degree positive rake angle, rounded gullet, and
wide space between points require less feed pressure and
reduce heat build up. Alternate set (every tooth set) cut
faster and turn more easily in tight radius cuts.
Band Saw Blades
for Portable Band Saws
Fits all popular portable band saws such as
Milwaukee, Black & Decker, and Porter Cable that use
1/2" wide x .020 thick x 44 7/8" length.
Cutting Band Saw Blades
Hard Back blades have the same tooth hardness as flex
back, but hardened backs (40-42Rc), accept heavier feed
pressure and blade tension. For production applications
involving easy to machine metal and similar materials at
SLOW SPEEDS. Use 10 and 14 TPI Wavy Set blades for solid
bars or angle iron 1/4" or more thick. Use 18 or 24 TPI Wavy
Set blades for pipe, tubing or thinner sections from 1/8" to
Matrix II Band Saw Blades
Bi-Metal blades resist heat in excess of 1000 degrees F
and outlast Flex Back blades up to 10 times longer. They
are choice for production type metal cutting for a wide
range of materials and cutting conditions. Band saws
designed to cut wood only CANNOT cut metal. Only band saws
designated as metal cutting (with gear/speed reduction)
can cut metal.
PRO® PGT(Professional Series Super Hard
Edge, Tempered Back) Band Saw Blades
Super Premium Band Saw Blades for Vertical / Stationary 2
Wheel Band Saws
All Pro® PGT Brand Saw Blades are
made from a special high alloy tool steel plus pin-point
carbides, molybdenum, silicon, and chrome to enhance
performance and longevity.
Super hard edge, tempered back band saw blades have a
tooth hardness of 64-66Rc and back hardness of 40-50Rc.
Comes in Skip and Hook tooth in widths of 1/8", 3/16",
1/4", 3/8", 1/2", 5/8", 3/4" and 1". It will cut Hard and
Soft Wood and Plastic. If your saw has speed reduction, it
will cut mild steel and non-ferrous metals. These blades
last longer and are more durable and controllable than any
other carbon band saw blade. Available in lengths from 72"
(High Speed Steel Teeth, Tempered Back) Band Saw
The Best Super Premium Band Saw Blades Made
These Colbalt / Molybdenum Highspeed Steel
Edge and Tempered Back Band Saw Blades are the best blades
you can buy. These Hook Tooth blades have a tooth hardness
of 66 - 68Rc and a back hardness of 47 - 51Rc. These blades
will cut exotic wood, hard and soft wood and plastic. They
will cut steel and non-ferrous metals with band saws that
have speed reduction. They will outlast standard carbon
blades 5:1 on wood and 10:1 on metal. These blades are tough
and shock resistant. You will get truer and straighter cuts.
They will even cut through wood with nails embedded in it.
MVPTM Hook Teeth: wide gullets with a
positive face angle and equally spaced teeth. Allows for
coarse pitch on narrow bands. Hook style teeth provide
excellent chip evacuation in thicker wood, plywood, and
composition material along with a faster cutting rate. On
band saws equipped with speed reduction and coolant, the
tool steel hook teeth cut non-ferrous metals including
alloy, steel, carbon steel, tool steel, stainless steel, and
air hardened die steels.
Custom welded blades are available upon request from
72" to 156".
Standard Metal or Plastic Guides with High-Tech Cool
Blocks® and Fine Tune Your Band Saw.
Poor performing imitations abound. Only Cool Blocks® are
COOL BLOCKS® blade guides are made from a high tech,
non-metallic composite material, "Graphite Impregnated
Phenolic Laminate", which contains three synthetic dry
lubricants that lubricate the blade but do not make it oily.
The metal to metal contact made by old metal guide blocks
creates heat and friction which cause premature blade wear
and breakage. These problems are eliminated with COOL BLOCKS
blade guides which allow blades to run cooler and last
longer with less friction. COOL BLOCKS blade guides will
improve the cutting performance of any blade width, but are
especially effective with 1/16" and 1/8" wide blades for
tight radius work.
14" Band Saws
12" Tilting TableBand Saws, Skil 10" HD3640, and
Dremel 10" 112
Shopsmith Band Saws
Style Sears saws using round guides
Taiwanese 14" Band Saws (Sears Craftsman 14", Jet,
16", and 18" Taiwanese Band Saws using 12mm
(.472") round guides
and old Sears Band Saws using round guides
10" 28-140, 16" 28-560 3-wheel, and 12" 28-190
guides for 8" Delta 28-180 & 28-185 and 10"
3-wheel Benchtop Saws Including: Delta 28-160 and
28-180 8" 2-wheel, Sears, K-Mart, Ohio Forge,
ProTech, Builder’s Square- Most saws taking 56?"
||For 9" 2
Wheel Band Saws Including Ryobi, Black &
Decker, Sears Craftsman, ProTech, Trademaster, and
For improved finish and blade performance. Lay
the side of the wood handle on the table surface and place
the silicon carbide stone against the back of the blade to
round off the edges and correct any weld misalignment. No
Blade Finishing Stone Advantages: permits tighter radius
cutting, smooths off uneven welds, prevents excessive wear
on thrust bearings, provides a smoother finish on the
workpiece during radius cutting and removes mushrooming on
back of blade caused by pressure against thrust bearings.
Saw Blade Lubricant prolongs blade
life and produces smoother and quicker cuts. Wax stick is
specially formulated to keep metal, plastic, and wood
cutting blades from clogging because of chips or pitch.
For use on all power and hand held cutting tools including
scroll, band, circular, hack and jewelers saw blades.
Lubricant Stick measures 8" long x 1" in diameter.
Minimum order is 5 band saw blades.
Band saw blades are drop shipped from the nearest warehouse.
Please allow 2 weeks for shipping.
write down the item info and the price before going to the
If you wish to acquire more technical information and tips
on Band Saw Blades, please call us at: