OLSON^®
Scroll Saw Blades

OLSON PGT Precision Ground Tooth OLSON MachTM Series Blades New! OLSON Reverse Tooth OLSON Skip Tooth OLSON Double Tooth OLSON Crown ToothTM OLSON Spiral OLSON Flat End Spiral

OLSON Thick WoodTM OLSON Pinned OLSON Metal cutting OLSON Scroll Saw Blades 6" Long OLSON 3" Pinned Hobby General Blade Use Notes Scroll Blade Selection Chart Ordering Instructions

 

OLSON PGT^®
Precision Ground Tooth (the best)   

     Skip

     Double

5" long with plain Ends;   Ground with no set

Precision Ground Tooth - PGT^®  are "The Best" blades available. Tested and endorsed by experts, PGT^® blades outperform and outlast all other blades. Their razor sharp teeth cut faster, smoother, and more accurately in both straight and radius cuts. A unique tooth geometry and widely spaced gullets minimize burning and provide rapid chip removal. They are made of the finest carbon steel for maximum strength, durability and longest blade life.

 

Olson No.	Univ. No.	Width	Thick- ness	TPI/ No. Rev.	Tooth Style	Pilot Hole	Cost Doz.	Cost Gross
455RG	5RG	.045"	.018"	12/9	Skip	1/16"	$3.50	$35.00
457RG	7RG	.047"	.018"	10/7	Skip	1/16"	$3.50	$35.00
459RG	9RG	.049"	.018"	8/6	Skip	1/16"	$3.50	$35.00
495RG	5RG	.045"	.018"	12/8	Double	1/16"	$3.50	$35.00
497RG	7RG	.047"	.018"	10 5/8	Double	1/16"	$3.50	$35.00
499RG	9RG	.049"	.018"	9/6	Double	1/16"	$3.50	$35.00

   OLSON Mach Series Blades

We are pleased to introduce Olson"s Precision Milled Mach Series Scroll Saw Blades. Engineered and designed after our PGT Precision Ground Tooth blades, the Mach series blades offer the same wide spaced, ultra sharp teeth for fast, accurate cuts in hard and soft wood. The difference? Mach blades are milled!

Mach precision milled scroll saw blades are similar to other brand names such as:

PM blades by Scroll America
FD-SR blades by Mike's Workshop
PTT blades by Steebar
PL blades by Seyco,& Roberts Studio

However, but for less money! at $27.00 per Gross plus Shipping & Handling.

 

Olson No.	Univ. No.	Width	Thick- ness	TPI/ No. Rev.	Tooth Style	Pilot Hole	Cost Doz.	Cost Gross
643RGR	3	.032	.014	13/7 REV	Skip	3/64"	$3.00	$27.00
645RGR	5	.038	.016	13/7 REV	Skip	1/16"	$3.00	$27.00
647RGR	7	.046	.016	8/6 REV	Skip	1/16"	$3.00	$27.00
649RGR	9	.055	.018	7/6 REV	Skip	1/16"	$3.00	$27.00

OLSON Reverse Tooth   

                 

5" Long, Plain Ends,    Milled with No Set

These blades have the same performance characteristics as our skip tooth fret saw blades with the added benefit or reverse teeth for a smooth, splinter free finish on top and bottom surfaces. Excellent blade for eliminating tear-out on birch and maple plywood.

Olson No.	Univ. No.	Width	Thick- ness	TPI/ No. Rev.	Tooth Style	Pilot Hole	Cost Doz.	Cost Gross
440R	2/0	.022"	.010"	28/21	Skip	1/32"	$2.50	$20.00
443R	2R	.029"	.012"	20/14	Skip	3/64"	$2.50	$20.00
446R	5R	.038"	.016"	12 5/9	Skip	3/64"	$2.50	$20.00
448R	7R	.047"	.017"	11 5/8	Skip	1/16"	$2.50	$20.00
450R	9R	.054"	.019"	11 5/8	Skip	1/16"	$2.50	$20.00
443R	12R	.062"	.024"	9 5/6	Skip	5/64"	$2.50	$20.00
420R	-	.100"	.022"	9/5	Skip	1/8"	$2.50	$20.00

 

OLSON Skip Tooth

            

Milled with No Set;   5" Long, Plain Ends

Skip tooth blades are available in more sizes than any other type Olson scroll saw blade. There is a complete range available from the new 400(#3/0) size for the finest of cutting to the 453 for coarser sawing of thicker materials. For hand or machine sawing of wood, plastic and fibrous materials. Skip tooth blades cut fast, provide good chip clearance and smooth finishes. also the No.2,4 and 5 are the best scroll saw blades for cutting metal, copper,brass and aluminum. Purchase one of our books on Metal Cutting and learn the tips,tricks and techniques on using these scroll saw blades.

 

Olson No.	Univ. No.	Width	Thick- ness	TPI/ No. Rev.	Tooth Style	Pilot Hole	Cost Doz.	Cost Gross
400	3/0	.022"	.008"	33	Skip	1/32"	$2.00	$18.00
440	2/0	.022"	.010"	28	Skip	1/32"	$2.00	$18.00
443	2	.029"	.012"	20	Skip	3/64"	$2.00	$18.00
445	4	.035"	.015"	15	Skip	1/16"	$2.00	$18.00
446	5	.038"	.016"	12.5	Skip	1/16"	$2.00	$18.00
448	7	.045"	.017"	11.5	Skip	1/16"	$2.00	$18.00
450	9	.053"	.018"	11.5	Skip	1/16"	$2.00	$18.00
453	12	.062"	.024"	9.5	Skip	5/64"	$2.00	$18.00

                      
OLSON Double Tooth

   Milled with No Set;    5" Long, Plain Ends

These blades are preferred by many scroll saw users. They are easy to distinguish form our regular skip tooth blades as they have two teeth together followed by a space for fast chip removal. The Double Skip tooth blades cut fast, leaving clean edges in wood & work great in all types of plastics.
The new DT432 is considered the best blade for cutting wood.

 

Olson No.	Univ. No.	Width	Thick- ness	TPI/ No. Rev.	Tooth Style	Pilot Hole	Cost Doz.	Cost Gross
432	3/0	.023"	.008"	33	Dbl.	1/32"	$2.00	$18.00
433	2/0	.023"	.011"	37	Dbl.	1/32"	$2.00	$18.00
434	1	.026"	.013"	30	Dbl.	3/64"	$2.00	$18.00
435	3	.032"	.014"	23	Dbl.	3/64"	$2.00	$18.00
436	5	.038"	.016"	16	Dbl.	1/16"	$2.00	$18.00
437	7	.044"	.018"	13	Dbl.	1/16"	$2.00	$18.00
438	9	.053"	.018"	11	Dbl.	1/16"	$2.00	$18.00
439	12	.061"	.022"	10	Dbl.	5/64"	$2.00	$18.00

 

OLSON Crown Tooth

Milled with No Set          5" Long, Plain Ends

Unique tooth design allows the blade to cut on both the up and down stroke. Cuts a little slower for more control. The finish is smooth with a clean, sharp, splinter-free edges in hard/soft woods, plywood, plastics & corian. The 2-way cutting action prevents melting behind the cut in most plastic including acrylic, lexan, and plexglas. They have no top or bottom for easy blade installation. Blade can be turned over for a fresh new set of teeth.  

OLSON Spiral

Milled with No Set,   5" Long, Plain Ends

These blades saw in all directions and have 360° cutting capability. Excellent for 0° radius scroll work; you never have to turn the work piece. Use for cutting all types of materials including wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. for use in power scroll saws and hand-held fret and jewelers saw frames. Cutting speed and finish depend on material thickness and number of teeth per inch. these premium blades are made of high carbon steel, hardened and tempered to stay sharp longer. Good for bevel cutting letters in names, increase throat capacity and cut longer pieces without turning!

OLSON Flat End Spiral

           

Milled with No Set;   5" Long, Plain Ends

Same blades as above but with FLAT ENDS for easier blade installation. Offered in the two most popular sizes.

OLSON Thick Wood

                           

Notched and set;   5" Long, Plain Ends

Special scroll saw blades with extra wide gullets for rapid cutting of solid hard/soft woods and multi-layers for 3/4" up to 2" thick. Hardened and tempered teeth for extra life. Every tooth set.

OLSON Pinned

  

Notched and Set;   5" Between Pins

For machines that require 5" pinned blades. Perfect for Sears Craftsman, Penn State, Delta, Ryobi, all 15" and 16" imported scroll saws.

OLSON Metal Cutting

                   

Milled with No Set;   5" Long, Plain Ends

These are the only metal cutting blades made specifically for power scroll saws. Jewelers or metal piercing blades are for use in hand held frames due to inherent brittleness. These premium blades are made of hardened and tempered steel and have more teeth per inch required for cutting thin metal and other hard materials. Blades have regular style tooth.

OLSON Scroll Saw Blades   6" Long

Notched Set;   6" Long, Plain Ends

Extra length for scroll saws having a longer stroke (over 1 1/4") and for cutting thicker stock (over 2").

OLSON 3" Pinned Hobby

2 3/4" Between Pins

For Dremel MotoSaw, Sears Craftsman Hobby Scroll Saw, Delta 15" Hobby Scroll Saw and Emco Lux Hobby Saw.